当前位置:网站首页 > 在线销售
产品分类
  • 暂无分类
联系我们
更多
联系人:
电  话:(0086)-755-83022293
传  真:
产品中心
WORLD-BEAM

Product Specifications

Supply Voltage 10 to 30V dc (10% maximum ripple) at less than 18 mA, exclusive of load
Range Opposed Mode (Visible Red):10 m
Opposed Mode (Infrared):15 m
Polarized Retro:4 m
Retro:6 m
Diffuse- Long Range (Visible Red):800 mm
Diffuse- Long Range (Infrared):1500 mm
Diffuse- Short Range:250 mm
 
Supply Protection Circuitry Protected against reverse polarity and transient voltages
Output Configuration 100 mA with short circuit protection OFF-state leakage current:
NPN:< 10 μA sinking
PNP:< 200 μA sourcing
ON-state saturation voltage:
NPN:< 1.6V @ 100 mA
PNP:< 3.0V @ 100 mA
Output Response Time Opposed Mode:1 millisecond ON/600 microseconds OFF
All others:800 microseconds ON/OFF
NOTE:100 millisecond delay on power-up; outputs do not conduct during this time
 
Repeatability Opposed Mode:140 microseconds
All Others:155 microseconds
 
Adjustments Diffuse, Retroreflective, and Polarized Retroreflective models (only):Single-turn Sensitivity (Gain) adjustment potentiometer
 
Indicators Two LED Indicators: Power (green) and Signal (yellow) Green ON steady:Power ON
Yellow ON steady:Light sensed
Green flashing:Output overloaded
Yellow flashing:Marginal excess gain (1 to 1.5X)
 
Construction Housing:ABS
Lenses:PMMA
Gain Adjuster:PBT
 
Connections 2 m (6.5') or 9 m (30') 4-wire PVC cable, 150 mm (6
Operating Conditions Temperature:–20° to +60° C (–4° to +140° F)
Relative Humidity:95% @ 50° C (non-condensing)
 
Environmental Rating IEC IP67 (NEMA 6) and 1200 PSI washdown NEMA ICS 5, Annex F-2002
Vibration and Mechanical Shock All models meet Mil. Std. 202F requirements method 201A (vibration: 10 to 60 Hz max., double amplitude 0.06
Certifications Approvals pending